![]() ![]() Then, click the Create button to start the process. Load your build Yocto image as “Firmware” Select “Choose removable disk” as your SD card Insert an empty MicroSD Card into the development host and execute the Rockchip SD Firmware tool. In Windows environments, please download the Rockchip SD Firmware tool to flash the image to the SD Card.Copy the prebuilt bootable Yocto image to the working directory on your development host.$ sudo dd if=.img of=/dev/sdĪfter dd has completed, enter the following command: $ syncįlash a Yocto or Android Image Prerequisites Data loss may result if written to the wrong device or in the worst case you kill your development hosts OS. For example insert the SD Card and than check device name with dmesg. Warning: Make sure you first properly identify the SD Card device name as for example /dev/sdb or /dev/sdc. Insert an empty SD Card into the development host and enter the following command to copy the. Then click START and wait for the process to be finished.Ĭopy the prebuilt bootable Ubuntu image to the working directory on your development host. img file previously copied to your working directory on the development host. Press the SELECT button and browse to the.It will auto-detected your storage drives. Insert an empty MicroSD Card into the development host and execute rufus.exe as the picture below.For better performance an class 10 SD card or higher is advised. The size should be preferable 16 GB or larger. Note: All files will be erased on the SD Card. In Windows environments, please download rufus to flash the image to the SD Card.Download the prebuilt bootable Ubuntu image to the working directory on your development host.The procedure describes how to flash an Ubuntu/Debian/Yocto image including u-boot, Linux kernel and filesystem to the SD Card.įlash a Ubuntu/Debian Image Prerequisites ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |